ET1
- Job
- Scrub and dry
- Coverage
- 300–720 m²/h
- Working width
- 300 mm
- Capacity
- 2.5 L
- Best for
- Small floors, 100 to 800 m²
Home · PUDU robots Perth
PUDU Robotics · Perth & WA
PUDU robots in Perth and WA: supplied, leased and serviced locally.
· Part of our Perth cleaning robot buyer's guide.
Eight PUDU units in Western Australia, from the compact ET1 to the 75 L BG1. Surveyed, deployed and serviced from Perth, not shipped over from the east coast.
From as little as $50 a day. Free site check; if the numbers don't stack up, we'll tell you.
- Owned & operated in Perth
- Servicing all of WA
- Engineering-led: robotics & autonomous systems
- Multi-OEM: the right robot for your site
- From as little as $50 a day
2016Founded, Shenzhen
130,000+Robots shipped
85+Countries and regions
4Product lines: cleaning, delivery, industrial, humanoid
An authorised PUDU reseller and service hub for Western Australia. We hold parts here, we commission on your floor, and because we also carry other OEM lines we will tell you when a PUDU unit is the wrong answer for your site.
The nine PUDU cleaning units we carry in WA.
Grouped by what they do, then ordered smallest to largest within each group. Brand stays on the label for search, but pick on capability: the job comes first, the badge second.
Scrub and dry
Water down, scrubbed, and vacuumed back up in one pass. The default for hard floors.
PUDUET1 New
300–720 m²/h · 300 mm · 2.5 L
The small-format unit. Fits a 500 mm aisle and resets itself at an 8-in-1 station. Built for 100 to 800 m².
View the ET1 →
PUDUCC1
700–1,000 m²/h · 15 L · 75 kg
The four-in-one workhorse: sweeps, scrubs, mops and vacuums across carpet and hard floor. PUDU's volume seller.
View the CC1 →
PUDUCC1 Pro
1,000 m²/h · 3,000 m²/h spot · 500 mm
The CC1 with a side brush for edge work and a spot mode for fast response cleaning. Take it if your floors have detail.
View the CC1 Pro →
PUDUBG1
Up to 2,000 m²/h · 75 L tank
The large-area scrubber. Sweeps and scrubs in one pass with 75 L on board, so it runs long between refills. Warehouse scale.
View the BG1 →
PUDUBG1 Pro
2,000 m²/h · 6,000 m²/h spot · 75 L
The BG1 with 3D lidar added to the perception stack and a higher top speed. PUDU aims this one at car parks and large-area deep cleaning.
View the BG1 Pro →Sweep and vacuum
Dry debris, litter and dust. What you want before a scrubber, or instead of one on carpet and rough surfaces.
PUDUMT1 Vac
Up to 1,400 m²/h · 700 mm · HEPA
Three-in-one with HEPA capture, so the dust it lifts stays lifted. Suits clinics, schools and anywhere air quality is on the brief.
View the MT1 Vac →
PUDUMT1
Up to 1,800 m²/h · 700 mm · 35 L
An AI sweeper that recognises litter and goes to it, rather than running a fixed lap regardless. Good for large, lightly soiled floors.
View the MT1 →Outdoor
Sealed and ruggedised for weather, dust and uneven ground.
Manual and detail
Not every square metre suits a robot. This is the machine for the rest.
See them working.
Manufacturer footage, in English. Nothing downloads until you press play.
The PUDU range side by side.
Manufacturer coverage figures, which assume clear floors. Real throughput runs lower and we will say what to expect for yours.
| Unit | Job | Coverage | Working width | Capacity | Best for |
|---|---|---|---|---|---|
| ET1 | Scrub and dry | 300–720 m²/h | 300 mm | 2.5 L | Small floors, 100 to 800 m² |
| CC1 | Scrub and dry | 700–1,000 m²/h | Four-in-one head | 15 L | Mixed carpet and hard floor |
| CC1 Pro | Scrub and dry | 700–1,000 m²/h | 500 mm | 15 L | Edge work and spot response |
| BG1 | Scrub and dry | Up to 2,000 m²/h | Sweep plus scrub | 75 L | Warehouse and large-format floors |
| MT1 Vac | Sweep and vacuum | Up to 1,400 m²/h | 700 mm | 6 L | Dust-sensitive sites, HEPA capture |
| MT1 | Sweep | Up to 1,800 m²/h | 700 mm | 35 L | Large floors, litter recognition |
| MT1 Max | Outdoor sweep | Up to 2,200 m²/h | 700 mm | 35 L | Outdoor, IP54, beacon navigation |
| SH1 | Manual scrub | 1,100–1,600 m²/h | 440 mm | 4.3 L | Detail work robots cannot reach |
CC1
- Job
- Scrub and dry
- Coverage
- 700–1,000 m²/h
- Working width
- Four-in-one head
- Capacity
- 15 L
- Best for
- Mixed carpet and hard floor
CC1 Pro
- Job
- Scrub and dry
- Coverage
- 700–1,000 m²/h
- Working width
- 500 mm
- Capacity
- 15 L
- Best for
- Edge work and spot response
BG1
- Job
- Scrub and dry
- Coverage
- Up to 2,000 m²/h
- Working width
- Sweep plus scrub
- Capacity
- 75 L
- Best for
- Warehouse and large-format floors
MT1 Vac
- Job
- Sweep and vacuum
- Coverage
- Up to 1,400 m²/h
- Working width
- 700 mm
- Capacity
- 6 L
- Best for
- Dust-sensitive sites, HEPA capture
MT1
- Job
- Sweep
- Coverage
- Up to 1,800 m²/h
- Working width
- 700 mm
- Capacity
- 35 L
- Best for
- Large floors, litter recognition
MT1 Max
- Job
- Outdoor sweep
- Coverage
- Up to 2,200 m²/h
- Working width
- 700 mm
- Capacity
- 35 L
- Best for
- Outdoor, IP54, beacon navigation
SH1
- Job
- Manual scrub
- Coverage
- 1,100–1,600 m²/h
- Working width
- 440 mm
- Capacity
- 4.3 L
- Best for
- Detail work robots cannot reach
Comparing across brands rather than within one? The full fleet comparison puts all seventeen units on the same table.
What changes when the supplier is local.
PUDU sells into Australia mostly through Melbourne, Sydney and Brisbane. That works until a 75 kg machine needs a technician, and the fix becomes a crate, a courier and a fortnight.
- Site survey first. We measure the floor and the obstacles before recommending a unit.
- Commissioned on your floor. Mapping, no-go zones, schedules and operator training, on site.
- Parts held in WA. Brushes, squeegees, filters and batteries, with no interstate freight leg.
Where we go: WA service coverage.
Three ways to pay for it.
Same robot, three commercial structures. Most suppliers offer one. Which suits you depends on your balance sheet, not on what we would prefer to sell.
Robot as a Service
A flat monthly subscription that includes the robot, service, support and software, from as little as $50 a day. No capital outlay and the lowest commitment of the three. This is where most sites start.
Lease
Fixed monthly payments over an agreed term without tying up capital. You get the unit working on your floor now and keep the option of what happens at the end of the term open.
Outright purchase
Buy the unit and own it. Priced per model, with an optional Care Plan covering service, parts and support so ownership does not mean you are on your own.
Full terms and worked numbers are on the commercial models page.
Which unit suits your site.
The short version, so you do not have to read eight product pages.
| Your site | Take | Why |
|---|---|---|
| Under 800 m², tight aisles | ET1 | The only unit in the range that fits. Anything bigger spends the day reversing out of corners. |
| 800 to 3,000 m², mixed surfaces | CC1 | Handles carpet and hard floor in one pass. The sensible default. |
| The same, but with edges and spills | CC1 Pro | Side brush for edge work, plus a spot mode for fast response. Worth the premium only if you need both. |
| Over 3,000 m² hard floor | BG1 | 75 L on board is what stops the machine spending half its shift at a tap. |
| Dry debris and litter, not grime | MT1 | A sweeper is cheaper to run and simpler to maintain than a scrubber. |
| Dust matters: clinics, schools | MT1 Vac | HEPA capture, so what it lifts stays lifted. |
| Outdoors, weather and dust | MT1 Max | IP54 sealed with beacon navigation where GPS and indoor mapping both struggle. |
| Mostly stairs, cubicles, corners | SH1 | No robot suits this floor. The upright is the cheaper and more useful buy, and we would rather say so. |
Under 800 m², tight aisles
- Take
- ET1
- Why
- The only unit in the range that fits. Anything bigger spends the day reversing out of corners.
800 to 3,000 m², mixed surfaces
- Take
- CC1
- Why
- Handles carpet and hard floor in one pass. The sensible default.
The same, but with edges and spills
- Take
- CC1 Pro
- Why
- Side brush for edge work, plus a spot mode for fast response. Worth the premium only if you need both.
Over 3,000 m² hard floor
- Take
- BG1
- Why
- 75 L on board is what stops the machine spending half its shift at a tap.
Dry debris and litter, not grime
- Take
- MT1
- Why
- A sweeper is cheaper to run and simpler to maintain than a scrubber.
Dust matters: clinics, schools
- Take
- MT1 Vac
- Why
- HEPA capture, so what it lifts stays lifted.
Outdoors, weather and dust
- Take
- MT1 Max
- Why
- IP54 sealed with beacon navigation where GPS and indoor mapping both struggle.
Mostly stairs, cubicles, corners
- Take
- SH1
- Why
- No robot suits this floor. The upright is the cheaper and more useful buy, and we would rather say so.
PUDU in WA: buyer FAQ
Who supplies PUDU robots in Perth?
Perth Robots is an authorised PUDU reseller and service hub for Western Australia. We carry the PUDU line alongside CenoBots and FJ Dynamics, so we match the unit to the site rather than selling whatever we happen to stock. Sales, deployment, operator training and ongoing service are all handled from Perth.
Is there a PUDU dealer in Western Australia?
Yes. Perth Robots is an authorised PUDU reseller and service hub, based in Mosman Park and covering the Perth metro area and regional WA. Most PUDU supply into Australia runs through east-coast businesses that ship the unit over and leave commissioning to you; here the site survey, the install, the operator training and the ongoing service all happen locally.
How much does a PUDU cleaning robot cost in Australia?
You can run one from as little as $50 a day. That covers both subscribing on Robot as a Service and leasing over a set term. There is no single sticker price because the right unit depends on your floor area, hours and surfaces. Tell us about the site and we will quote it; an outright purchase is priced per unit.
Which PUDU cleaning robots are available in Australia?
We carry eight. The ET1, CC1, CC1 Pro and BG1 are scrubber-dryers; the MT1 Vac and MT1 are sweepers; the MT1 Max is the sealed outdoor unit; and the SH1 is an upright scrubber for the detail work robots cannot reach. They run from a 300 mm brush that fits a convenience-store aisle up to a 75 L machine built for warehouse floors.
Can PUDU robots be serviced in Perth?
Yes. We hold consumables and wear parts for the units we supply, and service is included in the Robot as a Service and lease models. On an outright purchase you can add a Care Plan that covers the same scope. Remote diagnostics resolve a share of faults without anyone coming to site.
What is the difference between the PUDU CC1 and the CC1 Pro?
Both are four-in-one commercial scrubber-dryers rated 700 to 1,000 m²/h with a 15 L tank. The Pro adds a side brush that widens the working path to 500 mm, plus a spot-cleaning mode rated 1,500 to 3,000 m²/h for targeted work. If your floors are open and repetitive the CC1 is enough; if you need edge work and quick response cleaning, take the Pro.
Is the PUDU ET1 available in Australia?
Yes, and it is the newest unit in the range. The ET1 is a compact scrubber-dryer built for floors of 100 to 800 m²: it scrubs, sweeps, vacuums and dust-mops in a single pass, works down a 500 mm aisle, and resets itself at a station that charges, refills, drains, rinses and heats. It suits cafés, convenience stores, clinics and small offices.
Does PUDU make delivery robots as well as cleaning robots?
Yes. PUDU builds four lines: commercial cleaning, service delivery, industrial delivery and embodied intelligent robots. This page covers the cleaning range, which is what most WA sites ask for first. If you are after delivery, hospitality or materials handling units, get in touch and we will scope what suits the site.
Site survey · Fast WA quote
Get a PUDU robot quoted for your WA site.
Tell us the floor area, the surfaces and the hours, and we will match the unit, the deployment and the commercial model.
From as little as $50 a day. Flat monthly. Lower upfront commitment than buying outright.