The PUDU MT1 Vac sweeps, vacuums and dust-pushes in one pass, pulling fine particulate into a HEPA-filtered 14 L dust box rather than lifting it into the air. Built for sites where the dust itself is the problem, not just the debris on the floor.
Front, three-quarter, side, rear and top-down, including the twin dust boxes.
On a lot of industrial and workshop floors the visible debris is the easy part. The real issue is fine particulate: concrete dust, product dust, grinding residue and grit that a conventional sweeper lifts into the air and redistributes an hour later, somewhere else.
The PUDU MT1 Vac is built around that problem. It runs three functions in one pass, sweeping debris in, vacuuming fine particulate out and dust-pushing behind, with HEPA H11 filtration as standard and H13 available. What goes into the machine stays in the machine.
Capacity is split rather than pooled: a 14 L dust box as two 7 L units, plus a 6 L trash bin for the larger items the brushes pull in. That separation is what lets it handle a floor with both dust and dropped packaging without one filling before the other.
It shares the MT1's navigation and its low 490 mm body height, so it works under racking overhangs and conveyor runs. Cleaning width is 70 cm with a 55 cm suction path, and it recognises the floor surface underneath it and adjusts rather than running one setting everywhere.
Eight capabilities that matter when airborne dust is a compliance question, not just a housekeeping one.
H11 as standard with H13 available, so fine particulate is captured rather than redistributed.
Sweeps, vacuums and dust-pushes on the same run instead of across three.
A 14 L dust box as two 7 L units, plus a separate 6 L bin for bulkier items.
Reads the floor material underneath it and adjusts rather than using one setting.
A 490 mm body works under racking overhangs and conveyor runs.
VSLAM, markers and LiDAR SLAM together for repetitive racking aisles.
Brushes, filters and bins come apart for cleaning and swapping without tools.
Returns to charge between runs, with under 3.5 hours to a full battery.
The three things that decide whether a sweeper-vacuum actually improves air quality or just moves dust around.
HEPA H11 as standard, with H13 available where the requirement is tighter. On a floor with concrete dust or product residue this is the whole point: a sweeper without real filtration lifts fine particulate into the air and it settles again on everything you just cleaned.
A 14 L dust box split into two 7 L units, plus a separate 6 L bin for bulkier debris. Pooled capacity sounds bigger but fills unevenly; separating dust from dropped packaging means neither stream cuts the run short.
Body height decides how much of an industrial floor a robot can actually reach. At 490 mm the MT1 Vac works under racking overhangs and conveyor runs where dust genuinely accumulates, rather than cleaning the open thoroughfares and leaving the rest.
Hard floors where fine dust is the recurring problem: workshops, production floors, warehousing and anywhere with an air-quality obligation.
Production floors with grinding residue, product dust and offcuts in the same area.
Pick aisles and dispatch zones where concrete dust and packaging arrive together.
Workshops and stores where dust control is a genuine obligation rather than presentation.
Back-of-house areas where airborne particulate is a hygiene consideration.
Workshop bays with brake dust, grit and shop debris across a sealed floor.
Concourses and halls where sweeping alone would put dust back into occupied air.
One survey and one map, then a routine sized around your dust load rather than a brochure figure.
We check surface, aisle widths, overhead clearance and, importantly, where the dust actually comes from.
We map with VSLAM, markers and LiDAR, set zones and exclusions, and schedule around your production hours.
It sweeps, vacuums and dust-pushes in one pass, adjusting to the surface it reads underneath it.
Filters and bins are modular and tool-free, and filter servicing is on a schedule we set with you.
Manufacturer figures for the MT1 Vac. Runtime varies a lot with dust load and mode, so we size the schedule against your floor at survey.
On Western Australian industrial floors, fine particulate is rarely just a housekeeping issue. Silica dust from concrete, product dust in food and materials handling, and grit tracked in from outside all carry obligations, and a sweeper without real filtration makes the air-quality picture worse rather than better.
The MT1 Vac captures rather than displaces. HEPA H11 as standard, H13 available, with vacuum capture running on the same pass as the sweep. If you have a documented dust obligation, that distinction is the reason to choose this over a plain sweeper.
Reach is the other WA-specific factor. Sites here are usually tight around racking and workshop equipment, and a machine that only does the main thoroughfares leaves the dust exactly where it collects. The 490 mm body height gets it under the overhangs.
If the debris is bulky and the dust is secondary, the MT1 sweeps a wider range of items for less. If the work is outdoors, the MT1 Max is the rated unit. If the floor needs washing, you want a scrubber instead.
Built by someone who has engineered advanced systems and operated them in demanding environments. We know what these machines can and can't do.
We deploy and service every unit ourselves across WA. If a robot's down at 2am on a mine site, that's on us, in the same time zone.
We recommend the right robot for your site, not the only one we carry.
RaaS is a flat monthly subscription, not a capital gamble. The risk sits with us, and you run the robot as often as you need.
Tell us the floor area, the surface and what the dust actually is. We'll come back inside one business day with an indicative quote, a filter recommendation and a survey date.
The MT1 Vac is the dust specialist. For bulkier litter, outdoor work or wet cleaning, one of these fits better.
Wider debris range and a bigger bin, for floors where litter matters more than dust.
IP54-sealed and beacon-equipped for yards, carparks and hardstand outside.
When the floor needs washing rather than sweeping: scrub, sweep, vacuum and dust-mop.
Every model, every spec, in one table. Every spec side by side, grouped by what the machine does.