L3
- Job
- Scrub and dry
- Coverage
- 2,016 m²/h
- Working width
- 400 mm
- Access
- 700 mm gap
- Runtime
- 4 h
- Best for
- Offices, clinics, boutique retail
Home · CenoBots Perth
Authorised CenoBots partner · Perth & WA
CenoBots cleaning robots, supplied and serviced across WA.
· Part of our Perth cleaning robot guide.
Five units from a 400 mm compact scrubber to an 820 mm industrial sweeper, plus an AI spot cleaner that finds the mess instead of scrubbing a clean floor. From as little as $50 a day.
From as little as $50 a day. Free site check; if the numbers don't stack up, we'll tell you.
- Owned & operated in Perth
- Servicing all of WA
- Engineering-led: robotics & autonomous systems
- Multi-OEM: the right robot for your site
- Authorised CenoBots partner
5Units, 400 mm to 820 mm
2,500m²/h, the S5 industrial sweeper
700 mmTightest gap the L3 will pass
13 hSP50 runtime in spot-cleaning mode
Perth Robots is an authorised CenoBots partner for Western Australia. We also carry PUDU and FJ Dynamics, which is how we can tell you when a CenoBots unit is not the right answer for your floor.
The five CenoBots units.
Ordered smallest to largest. Access decides more deployments than coverage does, so the width figures matter more than they look.
Compact scrub
CENOBOTSL3
2,016 m²/h · 400 mm · 127 kg
The smallest footprint we carry. Squeezes through a 700 mm gap, so it works between desk pods, past barriers and down clinic corridors that stop a conventional machine.
View the L3 →
Doorway scrub
CENOBOTSL4
1,944 m²/h · 450 mm · 810 mm door
Fits a standard 32 inch door with the squeegee retracted, and cleans to within 50 mm of a wall. The unit for tenancies where the robot has to get in through the front door.
View the L4 →
Heavy scrub
CENOBOTSL50
2,203 m²/h · 510 mm · 6 h
Wash, dry and squeegee in a single pass for six hours. Cylindrical brushes handle grout and grit, which is what supermarkets, arenas and transit hubs actually need.
View the L50 →
Industrial sweep
CENOBOTSS5
2,500 m²/h · 820 mm · 50 L
The heaviest sweeper in the fleet and the fastest at 2,500 m²/h. 32-beam LiDAR and forklift detection, for floors measured in hectares with traffic on them.
View the S5 →
AI spot clean
CENOBOTSSP50
30+ debris types · 99% · 13 h spot
Different idea entirely: it patrols, classifies 30 or more types of debris at 99 percent accuracy, then drives to the mess and cleans it. Thirteen hours in spot mode.
View the SP50 →See them on real floors.
Six sites, five units. Nothing downloads until you press play.
Where CenoBots excel.
This range is strongest where access is awkward or the floor is enormous. Here is the honest mapping of site type to unit.
Supermarkets and retail
L4 and L50
Aisles are narrow, trading hours are long and the floor is graded on appearance. The L4 gets in through the front door and cleans to the shelf edge; the L50 takes the concourse. See more.
Warehouses and distribution
S5
Hectares of floor, dust, and forklifts. 2,500 m²/h with 32-beam LiDAR and forklift detection is the only sensible answer in the fleet, and a 50 L hopper means fewer stops. See more.
Hospitals and aged care
L3 and SP50
Corridors too tight for a ride-on, and a standard that is audited rather than eyeballed. The L3 fits the corridor; the SP50 patrols and deals with spills before anyone slips. See more.
Airports and transit hubs
SP50 and L50
Continuous foot traffic and no closing time. Spot cleaning targets the mess instead of running a full pass over a clean floor, and 13 hours covers a full operating day.
Offices and commercial towers
L3
Desk pods, glass partitions and after-hours access. The 700 mm clearance is the specification that decides whether a robot works in a fitted-out tenancy at all.
Mining villages and camps
S5 and L50
Grit tracked in from outside, big messes, and labour that is expensive to fly in and house. Sweep first, scrub second, both unattended overnight. See more.
The five side by side.
Manufacturer coverage figures, which assume clear floors. Real throughput runs lower and we will say what to expect for yours.
| Unit | Job | Coverage | Width | Access | Runtime | Best for |
|---|---|---|---|---|---|---|
| L3 | Scrub and dry | 2,016 m²/h | 400 mm | 700 mm gap | 4 h | Offices, clinics, boutique retail |
| L4 | Scrub and dry | 1,944 m²/h | 450 mm | 810 mm door | 4.5 h | Supermarkets, retail, gyms |
| L50 | Scrub and dry | 2,203 m²/h | 510 mm | Open floor | 6 h | Arenas, transit hubs, big retail |
| S5 | Sweep | 2,500 m²/h | 820 mm | Open floor | 5–7 h | Warehouses, DCs, carparks |
| SP50 | AI spot clean | 1,987 m²/h | Patrol | Open floor | 8–13 h | Airports, hospitals, hotels |
L4
- Job
- Scrub and dry
- Coverage
- 1,944 m²/h
- Working width
- 450 mm
- Access
- 810 mm door
- Runtime
- 4.5 h
- Best for
- Supermarkets, retail, gyms
L50
- Job
- Scrub and dry
- Coverage
- 2,203 m²/h
- Working width
- 510 mm
- Access
- Open floor
- Runtime
- 6 h
- Best for
- Arenas, transit hubs, big retail
S5
- Job
- Sweep
- Coverage
- 2,500 m²/h
- Working width
- 820 mm
- Access
- Open floor
- Runtime
- 5–7 h
- Best for
- Warehouses, DCs, carparks
SP50
- Job
- AI spot clean
- Coverage
- 1,987 m²/h
- Working width
- Patrol
- Access
- Open floor
- Runtime
- 8–13 h
- Best for
- Airports, hospitals, hotels
Comparing across brands? The full fleet comparison puts every unit on one table.
CenoBots in WA: buyer FAQ
Who supplies CenoBots in Perth?
Perth Robots is an authorised CenoBots partner for Western Australia. We carry the full range, survey the site before recommending a unit, commission it on your floor and service it from Perth. We also carry PUDU and FJ Dynamics, so we can tell you when a CenoBots unit is not the right answer.
What is the difference between the CenoBots L3, L4 and L50?
Size and access, mostly. The L3 has a 400 mm brush and fits a 700 mm gap, which suits offices and clinics. The L4 has a 450 mm brush and passes through a standard 810 mm door, which suits tenancies and supermarkets. The L50 has a 510 mm brush, runs six hours and is built for open floor at scale. All three wash, scrub and dry in one pass.
Which CenoBots robot is best for a warehouse?
The S5. It is the fastest unit in the fleet at 2,500 m²/h with an 820 mm sweeping width, and it runs 32-beam LiDAR with forklift detection, which matters when the floor has traffic on it. The 50 L hopper means it empties less often across a large area.
What does the SP50 actually do differently?
It does not run a fixed cleaning pass. It patrols, uses on-board AI and multi-channel LiDAR to classify more than 30 types of debris at about 99 percent accuracy, then drives to the mess and cleans that spot. In a terminal or a hotel lobby that is far more useful than scrubbing an already clean floor, and it runs up to 13 hours in spot mode.
How much do CenoBots robots cost in WA?
You can run one from as little as $50 a day, which covers both subscribing on Robot as a Service and leasing over a set term. There is no single sticker price because the right unit depends on your floor area, surfaces and hours. Tell us about the site and we will quote it; an outright purchase is priced per unit.
Can a cleaning robot get into a fitted-out tenancy?
That is exactly what the L4 is for. With the squeegee retracted it passes through a standard 32 inch doorway, so it can be brought into a tenancy through the front door rather than needing a loading dock and a lift booking. The L3 goes further, through a 700 mm gap.
Do CenoBots robots work on carpet as well as hard floor?
The scrubbers are built for hard floor. For mixed carpet and hard floor a four-in-one unit is usually the better answer, and we carry those in the PUDU range. This is the sort of thing we would rather sort out at the site survey than after delivery.
Are CenoBots robots serviced in Perth?
Yes. We hold consumables and wear parts here, and service is included in the Robot as a Service and lease models. On an outright purchase you can add a Care Plan covering the same scope. Remote diagnostics resolve a share of faults without anyone coming to site.
Site survey · Fast WA quote
Match a CenoBots unit to your floor.
Tell us the area, the surfaces and the access, and we will size the unit and price it.
From as little as $50 a day. Flat monthly. Lower upfront commitment than buying outright.